Can someone please help me identify what kind of headstock this is please
Loader help please
- Thread starter Malkymf565
- Start date
Can someone please help me identify what kind of headstock this is please
Dave W
Member
- Location
- chesterfield
Not a clue from that pic.
Going to suggest maybe not uk spec
It’s on a allied loader
Dave W
Member
- Location
- chesterfield
Better pictures may help
Allied loaders are USA
What do you want pictures off
I'm only hazarding a guess here, however, the brackets look like a farm made semi-quick attach design to pick up a top & bottom parallel pinned attachment rather than trying to align pin holes & the angst that causes.
i.e the bottom pins would be removed from the bucket/fork/spike, drive in, hook behind upper pins, crowd back, lift up, install lower pins then attachment is secure-ish
Before standardised Euro 3,5 & 8, etc there was multiple variations of hillbilly engineering quick hitches made on farms or by local engineerings firm to speed up attachment of implements.
I may of course be wrong, I have been before.
i.e the bottom pins would be removed from the bucket/fork/spike, drive in, hook behind upper pins, crowd back, lift up, install lower pins then attachment is secure-ish
Before standardised Euro 3,5 & 8, etc there was multiple variations of hillbilly engineering quick hitches made on farms or by local engineerings firm to speed up attachment of implements.
I may of course be wrong, I have been before.
Found this but can’t find anything else on it
That is the same as on the tractor
- Location
- Wormingford, Essex
Quick Attach Brackets For Select Allied-Farm King Loader Models
WOR 831650,831650,Worksaver Inc,brackets by worksaver;interfacing quick attach brackets;loader quick attach brackets;adapters for hitches and mounts;adapter brackets by worksaver;loader brackets for adapting to attachments;worksaver standard pin-on brackets;brackets by worksaver;interfacing...
www.edneyco.com
fermerboy
Member
- Location
- Banffshire
Only a guess, but is that to pick up skid steer buckets etc like in the USA?
See the Youtube guys in America use a similar setup on their buckets etc.
See the Youtube guys in America use a similar setup on their buckets etc.
Yeah trying to find the loader end to put on my other tractor not the bracket for putting on the implements
Dave W
Member
- Location
- chesterfield
Do yourself a favour and spend the time and money on fitting a euro headstock. Will be far better in long run
- Tags
- loader