Manitou 629

[Doldyfarms]

This morning our manitou started no bother and ran for an hour or so before it lost drive and now won’t start! Any ideas ?

 

[Top Tip.]

Could be diesel waxing in the cold.

 

[ACEngineering]

This morning our manitou started no bother and ran for an hour or so before it lost drive and now won’t start! Any ideas ?

thats something to do with the aux roller on joystick i think?

 

[ACEngineering]

thats something to do with the aux roller on joystick i think?

Sorry wrong one, this is the one for that code.

 

[ACEngineering]

This morning our manitou started no bother and ran for an hour or so before it lost drive and now won’t start! Any ideas ?

These have 2 ECU's on them, you need to press the button to cycle the codes for each off the ECU's and to switch between ECU's you have to press and hold the button down a while.

 

[Doldyfarms]

Engine ecu has no fault codes showing. The lift warning thing has the little exclamation light lit up in the top right hand corner.

 

[ACEngineering]

Engine ecu has no fault codes showing. The lift warning thing has the little exclamation light lit up in the top right hand corner.

its something on the safety start, maybe the forward/reverse switch or a relay, or the red stop button maybe.

 

[Doldyfarms]

Thanks for your help I’ll go and have look and see if I can’t figure it out!