Manitou codes

[Davy]

I have a 2010 634-120, and it is bringing up A2 and A7 on the sli. The code is not in the manual. It is locking out the hydraulics. Steering and driving are fine. Any clues? @ACEngineering

 

[ACEngineering]

I have a 2010 634-120, and it is bringing up A2 and A7 on the sli. The code is not in the manual. It is locking out the hydraulics. Steering and driving are fine. Any clues? @ACEngineering

Sorry been busy with stuff and not had chance to post reply.

This is how you look for error codes on the display. A2 is not part of the error code list only A3 to A7 are part of the error codes.

 

[ACEngineering]

I have a 2010 634-120, and it is bringing up A2 and A7 on the sli. The code is not in the manual. It is locking out the hydraulics. Steering and driving are fine. Any clues? @ACEngineering

2010 is on the change from the old blank sli box to the newer silver one. If you have the old black one then there are no error codes at all.

it would likely be a faulty axle sensor or broken wire to the axle sensor, either of which can be ruled out buy replacing the axle sensor as the kit comes with the wire up to the box in the cab.

 

[Davy]

Many thanks