Manitou MLT 626 Telehandler Radiator

[THELMA18HOLLAND]

Do you know where to get a radiator please?

 

[startinghandle]

Are there any radiator recondition firms in your area as that is best way

 

[DrWazzock]

Main dealer couldn’t get one for ours. Had to have the old one rebuilt at a radiator repair shop but they couldn’t manage to repair or replace the integral transmission oil cooler coil in the bottom tank of it so I had to fit an independent air cooled oil cooler between the radiator and the fan. It wasn’t easy. My machine doesn’t move about much though so doesn’t heat the oil much.

Try to find a radiator shop that can do a complete rebuild including the integral oil cooler.

 

[DrWazzock]

If the oil cooler isn’t leaking it should be an easier job for a general radiator repair shop.

 

[THELMA18HOLLAND]

Are there any radiator recondition firms in your area as that is best way

I’ve tried them, but they can’t do it - got a problem with the oil cooler

 

[THELMA18HOLLAND]

If the oil cooler isn’t leaking it should be an easier job for a general radiator repair shop.

The oil cooler is

 

[startinghandle]

I’ve tried them, but they can’t do it - got a problem with the oil cooler

I remember a guy telling me that he can repair pretty much any radiator ,
I just called him and he said yes he can do it but he's a long way from you
so not much use really

 

[ACEngineering]

Do you know where to get a radiator please?

I might be able to get new rad. i'll have a look in a bit.

 

[THELMA18HOLLAND]

I remember a guy telling me that he can repair pretty much any radiator ,
I just called him and he said yes he can do it but he's a long way from you
so not much use really

Where’s he based?

 

[THELMA18HOLLAND]

I might be able to get new rad. i'll have a look in a bit.

Thank you that would be great

 

[ACEngineering]

Thank you that would be great

Series 1 i not available, do you have a series 1, 2 or 3?

 

[ACEngineering]

Thank you that would be great

or were is the filler cap? Right on very top of the rad or on a neck above the fan cowling?

 

[ACEngineering]

Thank you that would be great

Would need serial number there are 3 rad part numbers i can find, oldest one is obsolete but the second 2 are good numbers, very expensive as genuine parts, aftermarket supplier has them on back order about 8 weeks still expensive though just not quite as bad!

Paul at Longford Radiators Coventry normally does a good job and can make most things.

I have had problems with them oil coolers in the past were have sent them for repair but unless they test them with HOT water they often dont leak! Had a couple like this and thats why i started using Paul Longford as the guy i was using just didnt seem to think they were leaking!

 

[THELMA18HOLLAND]

Series 1 i not available, do you have a series 1, 2 or 3?

Series 1

 

[THELMA18HOLLAND]

Would need serial number there are 3 rad part numbers i can find, oldest one is obsolete but the second 2 are good numbers, very expensive as genuine parts, aftermarket supplier has them on back order about 8 weeks still expensive though just not quite as bad!

Paul at Longford Radiators Coventry normally does a good job and can make most things.

I have had problems with them oil coolers in the past were have sent them for repair but unless they test them with HOT water they often dont leak! Had a couple like this and thats why i started using Paul Longford as the guy i was using just didnt seem to think they were leaking!

Serial Number is - 94538 ... Thank you for your help

 

[335d]

Main dealer couldn’t get one for ours. Had to have the old one rebuilt at a radiator repair shop but they couldn’t manage to repair or replace the integral transmission oil cooler coil in the bottom tank of it so I had to fit an independent air cooled oil cooler between the radiator and the fan. It wasn’t easy. My machine doesn’t move about much though so doesn’t heat the oil much.
View attachment 923267


Try to find a radiator shop that can do a complete rebuild including the integral oil cooler.

could you not have piped in a separate oil cooler in the radiator return with a few bits of pipe?
like what’s used on JCB and matbro

JCB PARTS TRANSMISSION OIL COOLER (30/921200) 3CX, LOADALL | eBay

You will need to check suitability by providing us with your machine serial number so we can check that we are providing you with the correct part. Final drive units.

www.ebay.co.uk

 

[startinghandle]

Where’s he based?

H&L Radiators just off Ludlow bypass
Shropshire .... also repair plastic fuel tanks

 

[startinghandle]

By now you have fixed your radiator???