maschio power harrow quick fit tine removal

[seedman stains]

Managed to change most using the easy change tool ( a quick turn ) but cant budge 3 others ,anyone got any top tips (changing the machine aint an option)

 

[Bob lincs]

As your hanging on the quick change tool give the tines a good smack with a hammer . We cut the handle off the machio tool and welded an old 3/4 drive socket to it so we now use a breaker bar .

 

[Horn&corn]

Tool doesn’t provide even pressure and we found a pair of levels from each side was considerably better

 

[seedman stains]

Another simple one man job!!!!

 

[le bon paysan]

Another simple one man job!!!!

But there's the answer, ... you're just a boy!

 

[seedman stains]

starts with f and finishes with ?

 

[seedman stains]

Well Ive had a result thanks too the help from above posts ( Roger included!!!) but in the end I had to adapt flogging the tines to hell sort of worked and even pressure worked but in the end a little more though was needed yes the tines are a tight fit made even more so with soil filling the gaps so I attacked the tine holders with the pressure washer gave the tines a boys tap and the topping on the cake was a little tool like the original slightly smaller diameter with a bolt welded on and a little persuasion with the windy gun job done
I was going to butcher the original tool thinking by the time i had chased around to make something up buying a new one would have been cheaper just as well I asked 70 euros before vat was the reply, mine wasn't as nice as that.
And they all lived happily ever after, well till tomorrow!!