Massey 5610 gear change issue

[valtraman]

My Massey 5610 has developed a problem . On the factory fit loader joystick u can change up and down power shifts as well as the standard t bar and shuttle lever but now it won’t change down shifts only upon the loader control. Press the downshift and goes up shift. T bar and shuttle lever works shifts fine . It’s all started after I cleaned cab out . Hosepipe on cab floor and wiped everything else down certainly not soaking wet so think it has something to do with it. Also a warning buzzer intermittently on as if the handbrake on or something.

 

[goldtop]

I think there's a couple of plugs that go into the bottom of the cab above the battery. Worth undoing them to see if they're clean and dry, also lift floor mat to make sure they're not wet on the cab side

 

[valtraman]

I think there's a couple of plugs that go into the bottom of the cab above the battery. Worth undoing them to see if they're clean and dry, also lift floor mat to make sure they're not wet on the cab side

Cheers I will look into that