Massey 5713 hydraulic rocker switch

[danpwll]

I see the new models have gone back to the rocket switch , anybody know if you can retro fit one into a 18 plate as hate them push buttons !!;

 

[daveydiesel1]

I see the new models have gone back to the rocket switch , anybody know if you can retro fit one into a 18 plate as hate them push buttons !!;

They are dreadful. Massey finally listenin?

 

[dee]

Yes it can be fitted but you need the dealer to activate it

 

[SMID]

Yes it can be fitted but you need the dealer to activate it

You can ? Does it just need a software upgrade ? I bought a switch when they first appeared and was beat with it and the service manager locally was less than helpful

 

[Driller]

Only in an essential spec I think.

 

[danpwll]

Any Massey dealers on here that can help ????

 

[James]

@dee Can you help?

 

[daveydiesel1]

@dee Can you help?

Is he a dealer?

 

[James]

Is he a dealer?

Near certain he works for one

 

[dee]

You can ? Does it just need a software upgrade ? I bought a switch when they first appeared and was beat with it and the service manager locally was less than helpful

Just checked you have to get a new piece of harness to fit the switch (ACW6788060)

Join it to the matching colored wires from the old connector.

Now the expensive part you need to get your dealer to update the linkage software and change a label code to get the new switch to work

 

[SMID]

Much obliged for that information @dee I had got the length of fitting the switch with a home made harness and for the lack of the correct software that was me beat . Mines a 6613 essential but with 6616 lift cylinders so the hydraulics are desperate slow even though they are ccls if the ecu is not told its a 6616 took note of the software version and its written on the fusebox lid.

 

[Finn farmer]

Much obliged for that information @dee I had got the length of fitting the switch with a home made harness and for the lack of the correct software that was me beat . Mines a 6613 essential but with 6616 lift cylinders so the hydraulics are desperate slow even though they are ccls if the ecu is not told its a 6616 took note of the software version and its written on the fusebox lid.

Out of curiosity, how is it possible to have 6616 lift cylinders on a 6613? Don't think that Massey gives you the choice to spec different linkages (like Valtra does)?

 

[daveydiesel1]

I thought this thread was about a 5713?

 

[SMID]

They

Out of curiosity, how is it possible to have 6616 lift cylinders on a 6613? Don't think that Massey gives you the choice to spec different linkages (like Valtra does)?

They are ex 6480 ones I had them on a 6470 then changed them to the 6613 when it came new . Aye it was @daveydiesel1 but the 67s have the same switch now only on the essential though.

 

[danpwll]

spoke to my dealer rep and he wasn't sure, they had mentioned they were bringing out a kit but will look into it !!!

 

[danpwll]

Just checked you have to get a new piece of harness to fit the switch (ACW6788060)

Join it to the matching colored wires from the old connector.

Now the expensive part you need to get your dealer to update the linkage software and change a label code to get the new switch to work

what sort of money is the harness and switch?? will wait for dealer to come and service something and get him to do it then !!!

 

[dee]

what sort of money is the harness and switch?? will wait for dealer to come and service something and get him to do it then !!!

Sorry my mistake the part number ACW6788060 was a kit but its no longer available
I have looked it up and here are the parts supplied in it.

1 x Switch (ACW2403810) £93
1 x Harness (ACW6788070) £70
3 x Sleeve (ACW6847840) £6.31 each

 

[danpwll]

The part number ACW6788060 is no longer available it was a kit but I have looked it up and here are the parts supplied in it.

1 x Switch (ACW2403810) £93
1 x Harness (ACW6788070) £70
3 x Sleeve (ACW6847840) £6.31 each

blimey !!! steep enough for a switch !!!

 

[dee]

Yeah does seem steep but speak to your local dealer he might do it a bit keener