Massey 6255

[onions]

Evening all. I’ve a Massey 6255. Anyone know how to reset the lift position sensor. Should I do it with the tractor running or off. Lift up or down??

 

[Farmer_Joe]

Search my posts I believe I did this on my 6400 but same on 6200

 

[onions]

Search my posts I believe I did this on my 6400 but same on 6200

Sorry can’t find it.

 

[dee]

Evening all. I’ve a Massey 6255. Anyone know how to reset the lift position sensor. Should I do it with the tractor running or off. Lift up or down??

What seems to be the problem that you wanna reset it

 

[onions]

I fitted a new one as I was having problems with the arms Desovered it was the computer that was wrong sent away to get repaired and fitted new sensor , now I can't get my linkage to work correctly , no matter where I have the wheel on the arm rest

 

[dee]

Have you any codes flashing in the triangle on the linkage cintrols

 

[Farmer_Joe]

MF 6400 series linkage reset

my linkage ha been irritating me with code given out by flashing lights since i did the brakes, (linkage works perfect i suspect i tested something before i plugged everything back in) it seems to hold this code and after reading through loads of elec digrams the only way to clear the codes it...

thefarmingforum.co.uk

 

[dee]

MF 6400 series linkage reset

my linkage ha been irritating me with code given out by flashing lights since i did the brakes, (linkage works perfect i suspect i tested something before i plugged everything back in) it seems to hold this code and after reading through loads of elec digrams the only way to clear the codes it...

thefarmingforum.co.uk

This calibration will not work on a 6200 series