Massey 7719 Dyna VT -MPH to KMPH

[accidentalfarmer1001]

Hi Massey Guru's, Please could you let me know how to change the speed display in the SETUP and INFORMATION SCREEN in instrument cluster from MPH to KMPH. looked everywhere in the operators manual and I cant see it.

 

[dee]

If your tractor is a tier 5 it will need the setting changed using a laptop

 

[Blue.]

On the 7400’s

You enter the menu by turning the key on with the clutch down then you lift off the clutch and press both side to side arrow at the same time,a menu then comes up with various options max engine rpm etc and you change from US to metric.

 

[accidentalfarmer1001]

If your tractor is a tier 5 it will need the setting changed using a laptop

the tractor has an AD Blue tank. is that Tier 5 ?

 

[accidentalfarmer1001]

The Cluster looks like this

On the 7400’s

You enter the menu by turning the key on with the clutch down then you lift off the clutch and press both side to side arrow at the same time,a menu then comes up with various options max engine rpm etc and you change from US to metric.

did not work .

 

[RmfJ]

Tier 5 has the thinner exhaust pipe

 

[mixedfmr]

Even 17 5713 SL has to be changed with laptop, that will be the dealer then, been thru that process, wait till something goes wrong, or take it in and talk sweetly for a 5 minute job

 

[accidentalfarmer1001]

this what the exhaust looks like

 

[Down and Dirty]

Do you have the datatronic screen?
if so it can be altered on there under settings then units last one on list (other) change from imperial to metric

 

[accidentalfarmer1001]

tried that but it did not work. Let me try in on the 7720S and see . maybe there is a glitch somewhere on the 7719. will get back to you with the result