Matbro telegram 40 boom ram

[Scu6499]

has anybody got a old telegram 40 in the nettles I’m in need of a replacement boom in out ram This machine is a telegram 40D 1984 vintage with a meer 26k hours.

 

[Nearly]

http://www.greatexportations.com/index.html

 

[335d]

This guy has had this advert on eBay for a long time. May have something
https://www.ebay.co.uk/itm/YELLOW-M...898968?hash=item4d79ea96d8:g:z8UAAOSwEW9aiz68

Check all his items as he has a few sizes listed

Or the usual suspects, great exportations, hes tractec,

https://tractec.grouphes.com/matbro-parts-spares

And of course our resident expert @ACEngineering

 

[ACEngineering]

This guy has had this advert on eBay for a long time. May have something
https://www.ebay.co.uk/itm/YELLOW-M...898968?hash=item4d79ea96d8:g:z8UAAOSwEW9aiz68

Check all his items as he has a few sizes listed

Or the usual suspects, great exportations, hes tractec,

https://tractec.grouphes.com/matbro-parts-spares

And of course our resident expert @ACEngineering

I got nothing for old 40 series.

if that is the guy I think it might be he keeps coming an going using different names regularly (it may not be the same guy though!)
if it is then he has a shed load of stuff taken out of the matbro factory when it closed, and I mean he had a shed load! he has sat on it for years and years slowly selling bits off here and there, I did get hold of him once and offered to go and have a look at what he had and make a few pallet loads up of stuff but he wont let anyone in I strongly suspect the stuff was supposed to be scrapped and not resold for use as its all a bit fishy IMO! All cash!

only thing I did manage to buy off him was a TR250 steering ram for £100 on ebay. no problems, just annoyed he wont let anyone look at what he has, he doesn't even know what most of the stuff he has is which is why I wanted to go and look to help identify some of it as its a total waste.

 

[Fendtbro]

I have a good matbro ram but it was slightly modified. closed centres are adjustable from 1920-2000mm with 1600mm stroke. let me know if any use.

 

[wasted years]

I have one I think, I kept it when I scrapped mine, if you want measurements or photos just say.

 

[ACEngineering]

Oh just remembered no use to the op but I do have 2 x new tilt rams for the early TR200. They will fit the later TR200 but will need a lock out valve off earlier machine.

 

[ACEngineering]

I have one I think, I kept it when I scrapped mine, if you want measurements or photos just say.

@Scu6499 could be your lucky day!