Maxxum 5130

[denmark53]

Anyone know how/if there is a free workshop manual available for my maxxum 5130

 

[davidroberts30]

Yes
If you cant find it on google send me your email

 

[Gapples]

Anyone know how/if there is a free workshop manual available for my maxxum 5130

I worked on them for a living & still have my training manuals, if you need any help or advice please ask, if I can help I will.

 

[Pistonbroke]

I worked on them for a living & still have my training manuals, if you need any help or advice please ask, if I can help I will.

Quick question,foot throttle sticks on both of ours. Any good way to free them up or lube?

 

[davidroberts30]

only place ive had them sticking on mine were at the pin on the end of the pedal
a good clean out round them with the air line and plenty wd40
i have drilled 2 small holes in the end of the pedal before now directly above the hinge and just deep enough the reach the pin and put wd40 into the holes

 

[Gapples]

Quick question,foot throttle sticks on both of ours. Any good way to free them up or lube?

As DavidRoberts says it's very much a case of keeping them clean & dust free.
If necessary pull out the carpet & you'll be able to get in with airline, but there's no magic bullet

 

[Pistonbroke]

Thanks both. Try keeping clean but they seem squeaky dry inside. If I oil them the dust sticks more.

 

[denmark53]

I worked on them for a living & still have my training manuals, if you need any help or advice please ask, if I can help I will.

Lift arms won't work on the switch in the cab but work fine on the buttons on the mudguard, guessing it's a wiring issue

 

[davidroberts30]

Fender buttons

 

[denmark53]

They all work

 

[davidroberts30]

@Gapples will tell you more but the inside switch works through the fender buttons

 

[milkloss]

The inside switch on ours has gone ganky.... need to wiggle it just in the right place for it to work.

 

[Gapples]

Lift arms won't work on the switch in the cab but work fine on the buttons on the mudguard, guessing it's a wiring issue

I've replied to your pm but I'll put in here as well.
It could easily be the switch itself but it's the fender buttons that cause most problems.
There is an earth runs through all the fender buttons when they are at rest ( out & unused )
The lamp needs this earth to go off & allow the toggle switch to work.
Any one switch can stop this, also it's common for the earth wire to have a bad contact under the LHS wing where it earth's out.

 

[Tommi]

Yes
If you cant find it on google send me your email

Hi davidroberts30
Having trouble with the clutch on 5130, would you be able to help? could do with a manual as well!

 

[davidroberts30]

Hi davidroberts30
Having trouble with the clutch on 5130, would you be able to help? could do with a manual as well!

pm me your email and ill send it, dont think i can do it via here