Mchale 991lb table issue

[Andrewfarm7]

After some help with a mchale wrapper. Old type 991lb is not returning table back level. Its bring left at 45 degree angle. Any help be grateful. Thanks

 

[icanshootwell]

After some help with a mchale wrapper. Old type 991lb is not returning table back level. Its bring left at 45 degree angle. Any help be grateful. Thanks

Have you checked the bolts underneath, there is half a dozen or so that have spacers, they can come slack over time and the table will rock a little.

 

[Andrewfarm7]

Have you checked the bolts underneath, there is half a dozen or so that have spacers, they can come slack over time and the table will rock a little.

Will check later but I think this is more to do with the electric settings maybe

 

[Pistonbroke]

After some help with a mchale wrapper. Old type 991lb is not returning table back level. Its bring left at 45 degree angle. Any help be grateful. Thanks

Ours will do that if the flow is too high or the return too restricted. Also,is the mat table returning to where it should) could be binding and keeping the table up

 

[icanshootwell]

Will check later but I think this is more to do with the electric settings maybe

When my table came loose it moved the sensor.

Also your pump could be on its way out.