Lincs Lass
Member
- Location
- north lincs
Think this has been brought up before but I want to install a permanent air line away from the compressor .
Theres loads of old black pipe in the sheds here that have all the fittings to get from 1/2inch bsp malleable iron onto the black Mdpe .
I can get reducers to go from 1/2 - 1/4 PCL but will mdpe be ok for air pressure ,,compressor is a 150ltr ,10 bar max ,
Presently have a long 8mm rubber pipe to where I use it most but as a fixed pipe ,Im thinking the 1/2 inch would have more volume
Theres loads of old black pipe in the sheds here that have all the fittings to get from 1/2inch bsp malleable iron onto the black Mdpe .
I can get reducers to go from 1/2 - 1/4 PCL but will mdpe be ok for air pressure ,,compressor is a 150ltr ,10 bar max ,
Presently have a long 8mm rubber pipe to where I use it most but as a fixed pipe ,Im thinking the 1/2 inch would have more volume