MF 185 / Hesston 4755 Stuffer

[Jsmith2211]

Was out baling hay a couple of weeks ago and the stuffer fell off on one side. Has bent the arm on one side and one of the tines on the actual stuffer. The peice circled in the photograph is missing, there's just a hole with some weld around it. In addition the following bearing has dissapeared. (Part number 5 https://parts.agcocorp.com/gb/en/apbsearch?q=masseyferguson/1637305/l&c=ba295001-1). The bracket isn't listed on the website, and I believe the peice it all bolts to is part of that bracket. I was wandering if a decent grade of bolt might be strong enough? Big washer each side and the proper bushing. Failing that does anyone know where i can get a second hand bit, same goes for the arm (part 14) as that is bent and I dont think it can be pressed straight. Thanks!

 

[Chae1]

Try Burden Bros, they break balers for spares. Got some from them last harvest.

 

[Jsmith2211]

Any ideas on the best place to go to have someone come out and look at it? There’s a sensor playing up that I want looked at too. As local as possible to Wellington Somerset