MF 7495 hydraulic oil transferring to backend!

Bumble Bee

Member
Arable Farmer
Our 7495 seems to be slowly transferring oil from the hydraulic tank to the backend. Everything is driving ok.
Does anybody have any ideas what this could be?
I was wondering where the braking system gets its oil from. Could it be leaking in through the carden brake etc?
Any advice appreciated.
 

Deerefarmer

Member
Location
USA
Try capping the cardan brake line and see if it still happens.

My thoughts are that the seal between the hydraulic pump and transmission is likely to be the culprit
Screenshot_20200808-102015_Books%20To%20Go.jpg
 

Bumble Bee

Member
Arable Farmer
Try capping the cardan brake line and see if it still happens.

My thoughts are that the seal between the hydraulic pump and transmission is likely to be the culprit
Screenshot_20200808-102015_Books%20To%20Go.jpg
That sounds like a likely culprit. Had something very similar happen on our JCB loadall. The hydraulic pump seal went and it filled the engine with hydraulic oil!

Thanks for your help.
 

ih1455xl

Member
Mixed Farmer
Location
northampton
Normaly have two of us doing it one on top and on underneath remember to take the bungs out of new pumps had a apprentice leave them in once test the brake accumulator whilst the tank is off and lift the bonnet up before jacking the back of the cab up otherwise the can smash the front window
 
Tags
deere

Will you help clear snow?

  • yes

    Votes: 73 32.2%
  • no

    Votes: 154 67.8%

The London Palladium event “BPR Seminar”

  • 16,490
  • 249
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top