MF Powerflow header belts

[ploughman1963]

Would anyone care to suggest the best place to get replacementts please?

Many thanks

 

[Tealo]

Pan anglia did do them.

 

[icanshootwell]

I have a spare one here that never got fitted, its for a 855, not sure if there all the same size or not.

 

[Badshot]

The genuine ones are cheaper now.
The spurious ones are definitely inferior.

 

[TEB87]

The last few we have had came from a firm called Beltec at Market Rasen and seem to have lasted well

 

[ploughman1963]

The last few we have had came from a firm called Beltec at Market Rasen and seem to have lasted well

That name was mentioned elsewhere as a good source

 

[ploughman1963]

I have a spare one here that never got fitted, its for a 855, not sure if there all the same size or not.

The one I need is 1460mm or 57.5” wide.

 

[4course]

is it split or just not going round ?

 

[icanshootwell]

The one I need is 1460mm or 57.5” wide.

I will measure it tomorrow.

 

[R&D]

Just had a lime spreader belt made by these guys - abconveyors.co.uk
I’m sure they advertise making power flow belts aswell

 

[icanshootwell]

The one I need is 1460mm or 57.5” wide.

Seems like mine is to small 50" wide.

 

[rob h]

I've got 2 on ours from beltec no problems with them and a lot cheaper than mf

 

[ploughman1963]

I cant get head around this - I am told that there are two sizes - 5' and 4'. ours are both about 2.5" under that. I guess yours is intended to be a 4' but that makes it 4.5" wider than my 4' belts??
How much do you want for it? I might as well have it to put on the shelf. PM me if you prefer.
Thanks

 

[icanshootwell]

I cant get head around this - I am told that there are two sizes - 5' and 4'. ours are both about 2.5" under that. I guess yours is intended to be a 4' but that makes it 4.5" wider than my 4' belts??
How much do you want for it? I might as well have it to put on the shelf. PM me if you prefer.
Thanks

My header is 15 ft and there are 3 belts on there, don,t want much for the one i have a drink will do, its came with the combine as a spare but never used it, to be honest i never fancied fitting it, looks a pig of a job, i will take a picture of it and you can decide what you want to do.

 

[ploughman1963]

They aren’t cheap so definitely a lot more than a drink for you! Whereabouts are you? Need to arrange postage/courier?

 

[Fraserb]

They aren’t cheap so definitely a lot more than a drink for you! Whereabouts are you? Need to arrange postage/courier?

He didn't specify what he drinks though.

 

[Tonym]

Apex Belts Bury st Edmund's. tel01284 752486
I had a set from them when I ran a power flow header. Lasted well with no problems. Sold the combine and they were still as good as new. Main thing is keeping them clean. I used to remove the v shaped plates underneath the header and blow them out with a road compressor to prevent dust build up. Rape was worst if you left it for a few days it would grow and make the belts slip.

 

[icanshootwell]

They aren’t cheap so definitely a lot more than a drink for you! Whereabouts are you? Need to arrange postage/courier?

Your only in the neighboring county, just keep coming down the A49 to Leominster then head towards Gloucester just after the Cadburys factory. I forgot to take a picture will do it soon.

 

[ploughman1963]

Your only in the neighboring county, just keep coming down the A49 to Leominster then head towards Gloucester just after the Cadburys factory. I forgot to take a picture will do it soon.

Oh, ideal, I shall come and cross your palm with silver one of these next days

 

[ploughman1963]

Advice seems to be Beltec are the ones to go for - twice the price of others but money well spent?