MF TascDoc don't recognize USB-drive

[bongorongo]

I'm trying to export data from TaskDoc to USB but no USB is recognized.
I've tried 2 different. Also reformatted them with FAT32 filesystem. Windows can read them all fine. But the Datatronic 5 monitor can't.

Anyone know what it takes to recognize the USB-plug?

 

[andyinv]

I'm trying to export data from TaskDoc to USB but no USB is recognized.
I've tried 2 different. Also reformatted them with FAT32 filesystem. Windows can read them all fine. But the Datatronic 5 monitor can't.

Anyone know what it takes to recognize the USB-plug?

What size is the drive, and what cluster/disk-allocation size did you pick?

I'd try a small drive, no bigger than 32gb and FAT32 with 4096 size as a starting point.

 

[bongorongo]

4 and 16 GB so no monster-drives.
Thank's, I'll try different settings.

 

[bongorongo]

Had to make a new partion table. And create a new FAT32 partition.

 

[andyinv]

Had to make a new partion table. And create a new FAT32 partition.

Usually, single partition is the way - did they have some hidden partition or something, perhaps you'd used for an OS install previously?

 

[bongorongo]

Usually, single partition is the way - did they have some hidden partition or something, perhaps you'd used for an OS install previously?

It was single partition for sure. I've used them for installing Linux previously, but they should be quite common USB still.