MF590 front end loader spool valve assembly

[nicko868]

Hi guys,

just bought a front end loader for our 590 although there are no spool valves with it at all so we are looking for a pair of double acting spool valves for the 590 if anyone can help we are in lincoln UK.

Cheers
Dan

 

[Lincs Lass]

You will need to T the connections for the loader in under the cab floor and then run two push fit conections to the right side under the cab and a single to the left ,,presume its an 80 loader.
,this way when you take the loader of ,you only have short hydraulic pipes that you dont have to unplug from the back end

 

[nicko868]

yes its an 80 loader! so really any generic 2 way spools would work then just have some pipes made up ?

 

[Lincs Lass]

One spool feed needs to have a float side as the lift rams on the 80 loader are single acting do when its lowered, you dont want a presurised spool block ,the other side does have to be double acting for the croud ram

 

[Lincs Lass]

@masseybreaker is your man for full advice for how to plumb it in and where from