Wiltshire-Lad
Member
- Location
- North Wiltshire
I'm looking to get a 2.5tonne knee mill moved from Essex to Wiltshire.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's a big countyI'm looking to get a 2.5tonne knee mill moved from Essex to Wiltshire.
Point taken. ;-) Near Basildon to near Swindon.It's a big county
I may be able to do this next week can I have sizes length width height pm if you like and can they load at each end and good access for artics cheersPoint taken. ;-) Near Basildon to near Swindon.
I can't self loadSize is 6'3 high, 5'7" wide and 5'3" deep. Unsure of the situation at Essex end, but I know they don't have the facility to load it. Realise that is probably going to be a problem for you. Resigning myself to the fact that I will probably have to pay for a hiab to lift/transport. :-(
At this end I can get a suitably sized telehandler to off-load and artic access is fine.
I'm going to Essex to scope it out on Wednesday.
Got it moved today on a backload thanks to a forum member. Fantastic reversing skills in a lorry far too large for my narrow lane.