Milwaukee

neilo

Member
Mixed Farmer
Location
Montgomeryshire
I cant seem to find the info or get an answer - how heavy is it with the battery fitted?

According to the Milwaukee site, 9.8lb (presumably that’s including battery? ).

Only due for launch next week, so no doubt more suppliers will have the info up very soon.
 
Last edited:
I have just bought the impact gun mentioned at the beginning, very impressed. I was looking at the 3/4 but was advised to get the 1/2 as same power so nowt to gain.
The 3/4 is slightly more power 2033 Vs 1898 nm,but my 1/2" takes the tractor wheel nuts off fine and it's easier to get 1/2" impact sockets
 

neilo

Member
Mixed Farmer
Location
Montgomeryshire
If anyone is looking, this Milwaukee fencing stapler is on Powertoolmate at £391 for a bare tool. That price is so far below anyone else that has listed it that it may be a mistake? I have rung to check and they say it is the 'utility stapler' and it is in stock.

They don't stock the staples yet though, so I may have a new toy just to look at next week. :ROFLMAO:

An update on this...

This is indeed the correct staple gun and it feels like a solid bit of kit, as you would expect of Milwaukee.

I ordered staples from another source, who have just informed me that milwaukee tell them there is no uk stock of staples currently, but are expecting them at the end of next week.:mad:

I will continue to admire my new toy until then... :ROFLMAO:
 

Half Pipe

Member
An update on this...

This is indeed the correct staple gun and it feels like a solid bit of kit, as you would expect of Milwaukee.

I ordered staples from another source, who have just informed me that milwaukee tell them there is no uk stock of staples currently, but are expecting them at the end of next week.:mad:

I will continue to admire my new toy until then... :ROFLMAO:
Have you gotten any staples to give it a test run yet?
 

Gwj

Member
No. They’re being withheld until the warranty on the staple guns run out I reckon.🤐

Powertoolmate reckon they’ll have them in on Monday, so presumably others will too…
Pretty sure Harrison machinery in Ruthin had stock of staples this last week
 
No. They’re being withheld until the warranty on the staple guns run out I reckon.🤐

Powertoolmate reckon they’ll have them in on Monday, so presumably others will too…
ITS have them listed as coming in soon. McVeigh parker have two pallets ordered even though they haven't got the guns. Milwaukee wanted to charge more to supply them than powertoolmate are charging the public
 

Half Pipe

Member
They were sending out to people who'd had guns off them and seeing what's left. One bloke ordered a gun and fifty boxes of staples😳
I suppose a fencing contractor will not be long going through a box.

The DeWalt staples have similiar specs but slightly different shape, does any one know if they are compatible?

Thinking other manufacturers may start supplying stables if suited both brands
 
I suppose a fencing contractor will not be long going through a box.

The DeWalt staples have similiar specs but slightly different shape, does any one know if they are compatible?

Thinking other manufacturers may start supplying stables if suited both brands
There's a firm called sacrofast selling copies for other guns so I expect it's a matter of time. They still sell genuine DeWalt though
 
Where did you find the code, Cant find it on there.
Screenshot_20220731-120809.png
 

neilo

Member
Mixed Farmer
Location
Montgomeryshire
ITS have them listed as coming in soon. McVeigh parker have two pallets ordered even though they haven't got the guns. Milwaukee wanted to charge more to supply them than powertoolmate are charging the public

If anyone is looking, 'A1 Power Tools' on eBay have a few boxes of the 40mm staples in stock currently (one less than they did have).

Their number is on the eBay contact details, and they'll do them a bit cheaper directly.

 
If anyone is looking, 'A1 Power Tools' on eBay have a few boxes of the 40mm staples in stock currently (one less than they did have).

Their number is on the eBay contact details, and they'll do them a bit cheaper directly.

Powertoolmate have the 45mm now,£1 cheaper than 40mm🤔. They're on ebay with a 15% code so £48 ish plus vat. Tried it out last week with 40mm. Good bit of kit👍
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 105 40.5%
  • Up to 25%

    Votes: 94 36.3%
  • 25-50%

    Votes: 39 15.1%
  • 50-75%

    Votes: 5 1.9%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 13 5.0%

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 1,746
  • 32
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
Top