New Holland 8260

[Scott 6050]

No definitely not

 

[fieldfarmer]

so if you were to pull off that arm and put mole grips on the shaft does it move freely around? the repair manual I have shows a roll pin (spring pin ) through the selector control. not splines.

 

[Scott 6050]

so if you were to pull off that arm and put mole grips on the shaft does it move freely around?

Just realised that the shaft is slipping and all that’s missing is a little grub screw to hold it in place.?

 

[fieldfarmer]

Just realised that the shaft is slipping and all that’s missing is a little grub screw to hold it in place.?

I just amended the post to ask that, the repair manual calls it a spring pin.

 

[fieldfarmer]

Just realised that the shaft is slipping and all that’s missing is a little grub screw to hold it in place.?

Ha Ha , thought you said defo not slipping, and was on splines then?

 

[Scott 6050]

Ha Ha , thought you said defo not slipping, and was on splines then?

It appears I didn’t look very carefully the first time?

 

[Scott 6050]

Just got it fixed. Thanks for all the help and advice.

 

[fieldfarmer]

Glad to help someone I been helped loads on here so it nice to help someone in exchange.