New Holland T6080 LCD dash

[South West Ireland]

Hi all,

I am looking to replace the centre LCD display on the dash of my New Holland T6080. It was broken when I purchased the tractor last year from a neighbour, I know the history of it and had a good idea of the hours it had done. Anyway I am just getting around to replacing it now. The LCD part comes with a ribbon cable that you can just push into a socket type. No soldering required. There are 22 pins/lines in the cable.
Anyway went to do this and the ribbon just pops back out of the socket, way too much space.................. the old broken LCD display had no ribbon cable attached to it, so I am not sure if I am missing another piece that attaches to the ribbon and holds in firm within the slots.......................any thoughts guys?

 

[335d]

difficult to tell from the picture, but it may be a slider type.
If so, then there is a little piece of plastic missing.
Google fpc connectors, and you’ll get an idea.
If you can get a manufacturer name of the socket, even better.

52437-2271 | Molex, 52437 0.5mm Pitch 22 Way Right Angle Female FPC Connector, ZIF | RS

uk.rs-online.com

https://www.molex.com/molex/search/deepSearch?pQuery=category%253A%2522FFC%252FFPC%2BConnectors%2522%2540productname%253A%2522Easy-On%2522%2540actuatortype%253A%2522Slider%2522

you might have to purchase a complete socket, but they’re not expensive

 

[South West Ireland]

difficult to tell from the picture, but it may be a slider type.
If so, then there is a little piece of plastic missing.
Google fpc connectors, and you’ll get an idea.
If you can get a manufacturer name of the socket, even better.

52437-2271 | Molex, 52437 0.5mm Pitch 22 Way Right Angle Female FPC Connector, ZIF | RS

uk.rs-online.com

https://www.molex.com/molex/search/deepSearch?pQuery=category%253A%2522FFC%252FFPC%2BConnectors%2522%2540productname%253A%2522Easy-On%2522%2540actuatortype%253A%2522Slider%2522

you might have to purchase a complete socket, but they’re not expensive

Good on ya 335d . I will take a closer look this evening for a manufacturer name or code.