• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

New holland tm not going above c1

Poss trans temp sensor issue.
This limits the trans to C1 if extreme cold.

also poss speed trans speed sensor asC range has speed detection to auto shift through range.
Would the temperature sensor have a fault code? It won't calibrate, says u33 which is handbrake not on, but it is on and the handbrake light is on dash as well
 

Jato

Member
Not necessarily, as if reads colder than actual temp, ECU will think it needs to protect it.
What temp showing when you go to calibrate?
 

fermerboy

Member
Location
Banffshire
Would the temperature sensor have a fault code? It won't calibrate, says u33 which is handbrake not on, but it is on and the handbrake light is on dash as well

The handbrake switch is two circuits, mine kept saying handbrake not on but light was working.
Look at switch and wiring there are 4 wires for two circuits. Changed mine and its been grand since.
 

How is your SFI 24 application progressing?

  • havn't been invited to apply

    Votes: 29 35.4%
  • have been invited to apply

    Votes: 16 19.5%
  • applied but not yet accepted

    Votes: 29 35.4%
  • agreement up and running

    Votes: 8 9.8%

Webinar: Expanded Sustainable Farming Incentive offer 2024 -26th Sept

  • 2,481
  • 50
On Thursday 26th September, we’re holding a webinar for farmers to go through the guidance, actions and detail for the expanded Sustainable Farming Incentive (SFI) offer. This was planned for end of May, but had to be delayed due to the general election. We apologise about that.

Farming and Countryside Programme Director, Janet Hughes will be joined by policy leads working on SFI, and colleagues from the Rural Payment Agency and Catchment Sensitive Farming.

This webinar will be...
Back
Top