new holland tm torque setting

[thewhinboy]

Hi everyone,
Rebuilding TM125 engine, has any one got the big end/ main bearing and head torque settings in lbs/ft if possible Thanks .

 

[agrimax]

Big ends........110 lbs/ft.
Mains................60 lbs/ft plus 90 degrees.
Head bolts......40,70 lbs/ft and 90 degrees.
Head through rocker shaft bolts......as above plus 45 degrees.(presumably that's 90 and then another 45 degrees?) Book doesn't elaborate........

 

[thewhinboy]

Big ends........110 lbs/ft.
Mains................60 lbs/ft plus 90 degrees.
Head bolts......40,70 lbs/ft and 90 degrees.
Head through rocker shaft bolts......as above plus 45 degrees.(presumably that's 90 and then another 45 degrees?) Book doesn't elaborate........

Thanks Agrimax. is head bolts 40/70 and 90 degrees same as 115 lbs/ft?

 

[agrimax]

I don't know how much more the 90 degrees adds but the torque settings for an 8340 for example is 160lbs/ft. Would have thought there shouldn't be any difference in torques between those engines.

 

[navo]

Hi would you be able to give me torque settings for new holland 495A