New Holland TS 115 Hydraulic lift calibration

[Smetsky]

Hello,

I have a problem with the hydraulic lift when lifting a heavy weight, the hydraulic pump turns off and the weight is lowering by itself.
The hydraulic pump doesn't adjust to the lowering weight. There is no error code showing on the display. I want to calibrate the hydraulic lift but I don't understand what the Automatic Pick up Hitch rods are. Can someone show me a picture of the Automatic Pick up Hitch rods (APUH)? And how I can adjust and reconnect the rods.

 

[ridger]

Rods will lift the pickup hitch up and down but maybe you have a fixed drawbar instead of a pickup hitch?

 

[ridger]

I would ad a picture but they wont upload here today whatever is up

 

[Smetsky]

Do the rods lift up the lift arms? Because you have to perform the calibration with a weight around 200kg but where do hang the weight? Do you hang the weight in the lift arms?

 

[agrimax]

The Auto hitch rods are shown by the yellow arrows. Does it have a pick up hitch or perhaps just a fixed swinging drawbar?
Just noticed you have two threads running on this same issue. Best to use one thread only...

 

[Smetsky]

Ok tractor does not have this, can I then perform the normal calibration without tool 4FT.950 and with the switch rise / work / lower.And do I have to press it upwards or is it the lift potentiometer.