- Location
- S.E
Even a Claas...
New toy day
- Thread starter Gedd
- Start date
Scholsey
Member
- Location
- Herefordshire
i know, have one in my 630 and multiple cup holders that ACTUALLY fit a normal sized mug on the cereal bowl holder in a r series.
Scholsey
Member
- Location
- Herefordshire
just a shame the rest is shite
- Location
- south norfolk
You boys are spoilt with built in cup holders.i use a 6/8 inch length of pto guard to hold cups in my old tractors
nick...
nick...
- Location
- northumberland
In the case puma the cup holder on the RH side is big enough to fit a 2L bottle in it but I have a couple of small bits of pto tube with some gaffer tape around it to make a snug fit so that it holds a can or 250ml bottle without them falling over, the bigger bottle goes in the pocket in front of steering wheel which also keeps it cool when A.C. on
- Location
- Wiltshire
Old 6250 holder was pants, wouldnt hold anything for long. My fendt has a good one and my flask never moves. Could do with a second for hot weather.
I am now going to have to sit in the tractor for the 1st time and only be interested in cup holders.
Feeling that I let the TFF massive down last night by posting a photo of the tractor and not being bothered to walk to the key safe so I could get in. I will do better next time
Bg
I am now going to have to sit in the tractor for the 1st time and only be interested in cup holders.
Feeling that I let the TFF massive down last night by posting a photo of the tractor and not being bothered to walk to the key safe so I could get in. I will do better next time
Bg
ollie989898
Member
- Location
- Wiltshire
Had the 2 on my steepest field (combine has issues steep) with a big cultivator on. Your not far wrong we thought the 828 would have been better. I do prefer the fendt operating system but I use it much more than JD so I dont usually have to think about it. I really like the gen 6 system its another step forwards.
Bg
- Location
- Wiltshire
Look what I have
still have the rubbish one
old tractor had the little joystick alongside the main one which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
Bg
still have the rubbish one
old tractor had the little joystick alongside the main one which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
Bg
Last edited:
- Location
- pembrokeshire
dont leave it out in the rain and clean your boots before you get inLook what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
.
- Location
- Pinnaroo. South Australia
Command pro would have to be an improvement over standard jd armrestLook what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
- Location
- Wiltshire
It is, old tractor was the same as this. Had a 7930 with the old system this is much much better
Bg
ColinV6
Member
Look what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
Very tidy. I’m sure they’ve thought this out but does your lower arm ever accidentally press some of those other buttons or knock the PTO off if your using the joystick and hit a bump? They look as though they will be right under where your arm sits.
- Location
- Wiltshire
Mark C
Member
- Location
- Bedfordshire
If you buy a Landrover discovery cup holder off eBay https://www.ebay.co.uk/itm/384150557338Look what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick alongside the main one which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
It sits perfectly in the rubbish cup holder and gold a can perfectly !
Also Fold Agri make a bottle holder that fits on the side of the dash and takes cool air off one of the vents. Works brilliantly and much better than the JD fridge.
Mouser
Member
- Location
- near Belfast
No, they designed it so your elbow and wrist get to sit on a delightful hard plastic so the only thing that gets knocked is your bones!
BBC
Member
- Location
- Gloucestershire
That’s the old Renault connection!
I remember a write up years ago, I think in Profi about the Ares when it came out, saying that only a French tractor designer could include a wine cooler in their tractor.
- Location
- South West
Those new JD led lights are amazing.Old one was a premium new is ultimate, that gets a more expensive seat, fridge and led all round. Front pto on both tractors, it will do most of our mowing. Went for a laminated front screen, if you have seen my Dear Mr Fendt thread
Still no dab with JD
Bg
benferg
Member
- Location
- North Canterbury, NZ
Have a set of the same mowers coming for September in nz. How did you plumb the lift for the front mower, did you run it off a flat face fitting or run a pipe from the back ?
Mouser
Member
- Location
- near Belfast
Front spool?