- Location
- S.E
Even a Claas...You have a fridge if you pay for it !
All you need is a bit better design .
Even Claas give you a cold compartment built in !
Even a Claas...You have a fridge if you pay for it !
All you need is a bit better design .
Even Claas give you a cold compartment built in !
You have a fridge if you pay for it !
All you need is a bit better design .
Even Claas give you a cold compartment built in !
i know, have one in my 630 and multiple cup holders that ACTUALLY fit a normal sized mug on the cereal bowl holder in a r series.
In the case puma the cup holder on the RH side is big enough to fit a 2L bottle in it but I have a couple of small bits of pto tube with some gaffer tape around it to make a snug fit so that it holds a can or 250ml bottle without them falling over, the bigger bottle goes in the pocket in front of steering wheel which also keeps it cool when A.C. onYou boys are spoilt with built in cup holders.i use a 6/8 inch length of pto guard to hold cups in my old tractors
nick...
In the case puma the cup holder on the RH side is big enough to fit a 2L bottle in it but I have a couple of small bits of pto tube with some gaffer tape around it to make a snug fit so that it holds a can or 250ml bottle without them falling over, the bigger bottle goes in the pocket in front of steering wheel which also keeps it cool when A.C. on
6250r will walk all over an 828 all day long but the fendt cab layout is hard to beat.
dont leave it out in the rain and clean your boots before you get inLook what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
Command pro would have to be an improvement over standard jd armrestLook what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
Command pro would have to be an improvement over standard jd armrest
Look what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
Very tidy. I’m sure they’ve thought this out but does your lower arm ever accidentally press some of those other buttons or knock the PTO off if your using the joystick and hit a bump? They look as though they will be right under where your arm sits.
If you buy a Landrover discovery cup holder off eBay https://www.ebay.co.uk/itm/384150557338Look what I have
View attachment 968325
still have the rubbish one
View attachment 968326
old tractor had the little joystick alongside the main one which was rarely used and annoying as one of the spools never had its own switch. Think this will be better
View attachment 968327
Bg
No, they designed it so your elbow and wrist get to sit on a delightful hard plastic so the only thing that gets knocked is your bones!Very tidy. I’m sure they’ve thought this out but does your lower arm ever accidentally press some of those other buttons or knock the PTO off if your using the joystick and hit a bump? They look as though they will be right under where your arm sits.
That’s the old Renault connection!Even a Claas...
Those new JD led lights are amazing.Old one was a premium new is ultimate, that gets a more expensive seat, fridge and led all round. Front pto on both tractors, it will do most of our mowing. Went for a laminated front screen, if you have seen my Dear Mr Fendt thread
Still no dab with JD
Bg
Have a set of the same mowers coming for September in nz. How did you plumb the lift for the front mower, did you run it off a flat face fitting or run a pipe from the back ?More Kuhn kit! Both were last min decisions but have been busy since arriving
View attachment 964991View attachment 964992
Front spool?Have a set of the same mowers coming for September in nz. How did you plumb the lift for the front mower, did you run it off a flat face fitting or run a pipe from the back ?