Newholland intelisteer

[Jimbo]

Being new to the world of auto steer I have completed my first two days of drilling with it and have to say it is fantastic so far . Only problem I seem to have is entering in at the beginning of the run it takes a wiggle to its self then is spot on . Just wondered if I need to be adjusting some setting or something ? Have all the default settings at mo (100% aggressiveness )
The system is newhollands own rtk roaming sim system through the interview screen .
Cheers .

 

[Chae1]

Being new to the world of auto steer I have completed my first two days of drilling with it and have to say it is fantastic so far . Only problem I seem to have is entering in at the beginning of the run it takes a wiggle to its self then is spot on . Just wondered if I need to be adjusting some setting or something ? Have all the default settings at mo (100% aggressiveness )
The system is newhollands own rtk roaming sim system through the interview screen .
Cheers .

I do a bigger headland and let it get online before dropping drill.

Another piece of advice i got recently was to have some slack in stabilisers. Just a half inch either side. This stops wiggles from tractor being so obvious in drilling as a bit of give.

 

[GPS_Support_2014]

If you go to Toolbox > NAV-P then you have some line acquisition settings that you can adjust.