-
Welcome to The Farming Forum!
As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
NH 6030 bent PTO stub
- Thread starter Thecub
- Start date
Pistonbroke
Member
Implement with too long pto shaft can do it when lifting or turning. Should be easy for them to change
GeorgeK
Member
- Location
- Leicestershire
I somehow managed to leave half of the pto attached to the tractor then operated the PUH. When I lifted the hook it went up the open end of the shaft and bent the shaft and PTO stub 
. Had the tractor for years after that and can confirm luckily no damage was done to the tractor. I would take the stub out so you can check for damage on the tractor end then put a new stub in and make sure it locates nicely, spins freely by hand then engage PTO to make sure it spins true.
. Had the tractor for years after that and can confirm luckily no damage was done to the tractor. I would take the stub out so you can check for damage on the tractor end then put a new stub in and make sure it locates nicely, spins freely by hand then engage PTO to make sure it spins true.
- Location
- DD9.
Bent a few when ph hit stone. NH and Valtra. Not had any side effects yet.
- Tags
- valtra