NH Baler auto lube

[Dman2]

The auto chain lube has stopped working on our 7060 baler
Any ideas?
It`s not blocked in bottom of reservoir

 

[icanshootwell]

try taking the end of that goes to the chain and blow some air back up the pipe, it's probably a blockage.

 

[Mark_Masterlube]

Have you got any images? Will try and see if I can help

 

[Rs chunk]

Empty out the auto lube tank and clean out what’s in the pump then start with fresh oil. My welder after a good few years stopped piling and it was sludge in the bottom of the tank

 

[Rufey]

I had the same issue with my claas rollant 255, not sure how NH balers work but there was a non return valve on the top of the cylinder pump that needed renewing.

 

[buttercup]

Did you sort it ?

 

[Rufey]

Did you sort it ?

Yeah, cost £83 for the non return valve that you can fit on 2 fingers but it works now so that’s the main thing