Nixon power washer

ACEngineering

Member
Location
Oxon
Ye same on mine position 1 and position 2 both will blow cold water threw but boiler won't fire up on either position.

2 is for heat, might take a short while for fuel to get to burner on first start up, you should hear the fuel pump running all the time on position 2 even if you have not pulled the trigger on the lance.
 
Location
Morayshire
Is the backup from Nixon any better these days? My 3 phase is about 10 years old now and burner stopped working at about 6 months old, lady in the office basically told me to bugger off 😂 never did get it fixed. Just use it on cold.
 

fermerboy

Member
Location
Banffshire
Is the backup from Nixon any better these days? My 3 phase is about 10 years old now and burner stopped working at about 6 months old, lady in the office basically told me to bugger off 😂 never did get it fixed. Just use it on cold.
Control box for the burner fried on mine. Nixons couldn't get one as they fit a different type now. Bought 2 from Spain for less than one from Nixons.

I ran mine hot wired for a bit till I got a new unit, just had to keep her going when on hot as the burner won't stop at all when switched to 2. :oops: :oops: :oops:
 

Latest Poll on TFF

  • Yes

    Votes: 22 15.0%
  • No

    Votes: 125 85.0%

JCB launches Fastrac ‘iCon’

  • 147
  • 0
Written by Charlotte Cunningham from CPM Magazine

JCB has launched new Fastrac 4000 and 8000 Series tractors with an all-new electronics infrastructure which is claimed to deliver higher levels of performance. According to JCB, the new Fastrac iCon operator environment has three key features: iConfigure – creating a bespoke control experience for every operator iConnect – integrating advanced precision agriculture technology iControl – redefining operation through new driveline software The 175hp to 348hp (133kW to 260kW) Fastracs feature the new iCon armrest console and touch-screen display to provide flexibility in operator allocation and operator information, as well as a new transmission control strategy to enhance operator comfort and powertrain efficiency, says the manufacturer...
Top