Operators manual for Merlo 26.6EVT

[Lloyd Banx]

Evening all.
Just bought a Merlo which has no operators manual and thought it might be a good idea to aquire one for maintenance etc. Would be very grateful if anyone could be kind enough to point me in the right direction as to where I could get one please. I get how to operate the thing (mostly) but am not sure which position the lever for the diff lock should be in, obviously not engaged but there are two positions other than pusing it right forward and the decals are not very helpful. Could anyone advise please? Thanks in advance.

 

[Chris F]

Have you tired this place: https://www.findanymanual.com/

 

[Matt L]

Did you buy private or from a dealer. If from a dealer, they legally have to provide a manual for the machine at point of collection.

 

[Scrapjockey]

It sounds like the steering mode lever rather than a diff lock

 

[v8willy]

Diff lock if fitted is a foot switch down beside the inching pedal, on most of them at least.

 

[Lloyd Banx]

Did you buy private or from a dealer. If from a dealer, they legally have to provide a manual for the machine at point of collection.

I bought it privately Matt.

 

[Lloyd Banx]

It sounds like the steering mode lever rather than a diff lock

It's got the diff lock symbol next to it, I think. The one for the steering settings is quite easy to understand. I'll see if I can get my camera to work and take a pic and post.

 

[v8willy]

It's got the diff lock symbol next to it, I think. The one for the steering settings is quite easy to understand. I'll see if I can get my camera to work and take a pic and post.

There is a diff lock light up around that region ( red ) with the symbol beside it?

 

[Planttech]

It's got the diff lock symbol next to it, I think. The one for the steering settings is quite easy to understand. I'll see if I can get my camera to work and take a pic and post.

Being an evt I suspect that it has a manual lever for diff lock. I think forwards position is engaged as it spring returns to neutral/middle position. Manuals can be sourced send me a message if you want

 

[Lloyd Banx]

 

[Lloyd Banx]

Being an evt I suspect that it has a manual lever for diff lock. I think forwards position is engaged as it spring returns to neutral/middle position. Manuals can be sourced send me a message if you want

Yes it spring returns if you push it forward, I have just uploaded a pic. If the middle position is neutral, what happens if it's pulled back?

 

[Lloyd Banx]

There is a diff lock light up around that region ( red ) with the symbol beside it?

No red light

 

[Lloyd Banx]

Yes it spring returns if you push it forward, I have just uploaded a pic. If the middle position is neutral, what happens if it's pulled back?

I assume it locks the rear diff?

 

[Sparkplug]

Evening all.
Just bought a Merlo which has no operators manual and thought it might be a good idea to aquire one for maintenance etc. Would be very grateful if anyone could be kind enough to point me in the right direction as to where I could get one please. I get how to operate the thing (mostly) but am not sure which position the lever for the diff lock should be in, obviously not engaged but there are two positions other than pusing it right forward and the decals are not very helpful. Could anyone advise please? Thanks in advance.

Is it your first Telehandler?

 

[Planttech]

I assume it locks the rear diff?

Yes only diff lock on rear axle on that. Don’t think pulling back does anything