Opico 600

[Alwaysinit]

Got the above dryer here, turned off last night but this morning cannot get it to fire.
It starts up ok and turns the heat on displaying ignite on the control box but after a minute or so shuts down displaying no flame on control box.
Any help?

 

[chaffcutter]

Got plenty of fuel? Check the spark gap and that the points are clean and dry. The tube that hangs down with a plug in the end takes dirt from the fuel, undo it (catch the stuff coming out) and drain it.

After that,not sure!

 

[Alwaysinit]

Thank you.
I got going again with a bit of help, flame detector sensor seemed to be the problem.