Orby fullwood key pad feeder

[it's not over]

Just fitted new parlour feeders,orby, I believe Fulwood use a similar keypad. Problem is after 10 or 15 minutes they go to sleep,if your out of parlour or a slow cow they go to sleep, not a big headache but slows down efficient milking, is there any way to change sleep to say 30 minutes

 

[Cowwilf]

Just fitted new parlour feeders,orby, I believe Fulwood use a similar keypad. Problem is after 10 or 15 minutes they go to sleep,if your out of parlour or a slow cow they go to sleep, not a big headache but slows down efficient milking, is there any way to change sleep to say 30 minutes

They look like davlec touch feed they either sleep after 10 minutes of no use or stay on permanently unless power to them switched off between milkings.

To change the setting to always on press both bottom left and bottom right keys at the same time to enter the menu then the side change key (bottom left) to flick through the options until lpor is displayed (10th option) then press the enter key (bottom right) to select that option it'll display on press the enter key again and it'll change to off leave it a few seconds and the display will return to lpor then press both setup buttons again to exit menu very quick to do once you've done one. I'll try attaching a user manual

 

[it's not over]

You'd think they'd have an option for 30 mins, 1 hr