young&keen
Member
Yea that's wat i swaying 2! Could really do to have a play with both
Only thing I could add would be if you have 3 phase get a 3 phase machine, you'd never regret it.Yea that's wat i swaying 2! Could really do to have a play with both
Got 3phase on farm but not in workshop unfortunately!
High frequency start, so the torch auto reignites without having to re press the trigger, very handy for cutting mesh etcHF start?
I have a Plasma part cut 40 will cut 12mm, but needs more than 13amp plug for thick stuff
Yea I got a P40 HF good machine, wouldn't be as good as Hypertherm but I find the r tech machine tends to understate its capabilities rather than over state like some of the lower end machines
would you have the concentration to do 6 minutes of cutting in 10?do they cut out much with over heating wi being a 60% duty cycle?
would you have the concentration to do 6 minutes of cutting in 10?
thats a severe amount of concentration
Aye but to be realistic you would be cutting for 40 seconds then it would trip waiting 20 seconds before u could go again.would you have the concentration to do 6 minutes of cutting in 10?
thats a severe amount of concentration