Podger

[casemx 270]

Hi anybody have an idea of the width of the head on a podger spanner ? I know that different sizes might be different so just a rough idea thanks

 

[spanners and hammers]

its relative to the size range of the holes your trying to align

 

[casemx 270]

its relative to the size range of the holes your trying to align

Sorry should be more specific the ratchet spanner type the spanner end looking at a 24/19 mm

 

[Mur Huwcun]

Not these type then! Knocked up from brocken ratchets

 

[Kidds]

Look them up on ebay and judge from the pics. You know the hole is 24mm so go from there.

 

[Forever Fendt]

generally they are to bulky for most things don't bother with them any longer

 

[spanners and hammers]

the best podgers and align drifts are made by klien ,,, look on the website tells you all the dims

 

[Wiltshire-Lad]

A 24mm spanner is for a nominal M16 nut, and 19mm spanner for M12, so I’d hope the podger would have that size to align for the bolt.

 

[ianm641]

i know its a swear word but snapon used to sell a scaffolding ratchet podger in black finish had one for a few years was good with gearboxes

 

[Hilly]

I was using them recently putting a shed up , I like ten little lip stops them slipping off and dropping them like ordinarily spanner .

 

[ianm641]

they even had a longer lever for direction on the ratchet so could be changed with gloves on will ask the snapon stealer if they still do them as they were for some reason quite cheap

 

[spanners and hammers]

yes they still do them but its a new model ,, i have been waiting for 6 months for a repair kit for mine from the local agent

 

[ianm641]

yeah there not the fastest at replacing tools got a few tools in box waiting to be replaced