Post knocker pulley wheel

[Haythers]

Just looking for recommendations on where to get 2 post knocker pulley wheels from so that I can convert my old parmiter to the rope system rather than the chain, rang shelbourne because they took over parmiter but they wanted something like £500

 

[Goweresque]

Something like this?

https://www.ebay.co.uk/itm/CAST-IRO...897732?hash=item2150587f04:g:T1oAAOSwUP5cMisU

 

[trev7530]

Try Protech, they use a nylon type pulley.

 

[cosmagedon]

Try looking on eBay for Nylon Sheave, loads of different sizes for you to choose from

 

[Hesstondriver]

i think there is a 'conversion' kit available online for that very purpose , ill try and find a link

 

[Larel]

Pardon our interruption...

The above is the ones i was advised to buy.

 

[Haythers]

Thanks for the advice everyone I went with protech in the end just because I got the rope off them aswell but pretty much the same price as others suggested in n eBay

 

[WiltsBoy]

Thanks for the advice everyone I went with protech in the end just because I got the rope off them aswell but pretty much the same price as others suggested in n eBay

We have just done the same with Protech. Its a bumch of parts on the floor at the moment; do you have a picture of your conversion as they haven't sent any instructions; will ring if not as they were very helpfull.

 

[Haythers]

We have just done the same with Protech. Its a bumch of parts on the floor at the moment; do you have a picture of your conversion as they haven't sent any instructions; will ring if not as they were very helpfull.

I don’t have any pictures at the minute and I probably won’t see the knocker for a while, but the pulleys of a remember were the same diameter for the pins and then I welded a D shackle to the weight for the rope to attach to