Power harrow combination.

[Bobthebuilder]

Never noticed you, looks a fair lump, also strange size of new pronto 7m

 

[Chae1]

Saw the new folding 4m horsch KR in the flesh tonight, hell of a heavy looking yolk, and then there’s the huge front tank no idea how your meant to see at junctions and gateways

There's a contractor up here running a 6m horsch KR with front hopper on t7 270.

 

[glasshouse]

I thought it was you that was looking at ot with your mouth open !!!!
A far bit of kit but not so sure about that front tank , I bet the fencer is not short on work with that on the front

Farming on the urban fringe, front tanks are a big nono

 

[Bobthebuilder]

There's a contractor up here running a 6m horsch KR with front hopper on t7 270.

It was the 2800 split grain/fert hopper, not sure if grain only 1 is much smaller or not

 

[Speedstar]

Never noticed you, looks a fair lump, also strange size of new pronto 7m

Yes I though that as well

 

[KB6930]

Saw the new folding 4m horsch KR in the flesh tonight, hell of a heavy looking yolk, and then there’s the huge front tank no idea how your meant to see at junctions and gateways

I actually thought it looked a lot less bulky than a kuhn or amazone front hopper. It was wide but didn't stick as far out as some.

What were the hooks on the front of it for?

 

[Martyn]

Anyone running a combi set up on a fendt 313? 130hp I’m thinking a kukn PH & accord drill, not big acreage but want to keep independence.

 

[Fergieman]

Never noticed you, looks a fair lump, also strange size of new pronto 7m

The pronto was 7.2m which x5 is 36m
Agree though strange size.

 

[Bobthebuilder]

I actually thought it looked a lot less bulky than a kuhn or amazone front hopper. It was wide but didn't stick as far out as some.

What were the hooks on the front of it for?

You can put it on the back of a tractor and hitch something like a joker on the back with seeding option, can fit a ring hitch as well as the 3point, that's why the frame the tank sits in is so heavily built

 

[KB6930]

You can put it on the back of a tractor and hitch something like a joker on the back with seeding option, can fit a ring hitch as well as the 3point, that's why the frame the tank sits in is so heavily built

That makes sense

 

[BuskhillFarm]

There's a contractor up here running a 6m horsch KR with front hopper on t7 270.

There was a contractor here who had 6m Kuhn on a 828, promptly changed for a 936.
Seen plenty of triple mowers on tm150s and 6930s too wouldn’t want to be buying the tractor afterwards

 

[quattro]

The pronto was 7.2m which x5 is 36m
Agree though strange size.

Probably for controlled traffic

 

[alomy75]

Probably for controlled traffic

Or someone who doesn’t tramline!

 

[Mark.MW]

Anyone running a combi set up on a fendt 313? 130hp I’m thinking a kukn PH & accord drill, not big acreage but want to keep independence.

Have a look at the SKY Agriculture Progress M. It can be used on 100hp tractors, so your Fendt should be more than enough for it.

 

[Devon Gurfallo]

Anyone running a combi set up on a fendt 313? 130hp I’m thinking a kukn PH & accord drill, not big acreage but want to keep independence.

You may struggle with weight. I have a 3m Andrew Guest combi. On the level it fine but you want a lot of weight on the front turning on hills, that with a new holland T6.180

 

[Mark.MW]

You may struggle with weight. I have a 3m Andrew Guest combi. On the level it fine but you want a lot of weight on the front turning on hills, that with a new holland T6.180

 

[Martyn]

You may struggle with weight. I have a 3m Andrew Guest combi. On the level it fine but you want a lot of weight on the front turning on hills, that with a new holland T6.180

Do you run a plough press on the front? It just about handles a 5f kv plough fine on the flat do have to think about turning on slopes

 

[Devon Gurfallo]

Do you run a plough press on the front? It just about handles a 5f kv plough fine on the flat do have to think about turning on slopes

No, 900 kg on the front linkage. A press is on my list of new toys one day tho.

 

[Sandy]

There's a contractor up here running a 6m horsch KR with front hopper on t7 270.

There’s quite a lot of 6m on JD6250 seem to handle it no bother

 

[alomy75]

There’s quite a lot of 6m on JD6250 seem to handle it no bother

That will be much bigger than the t7 270. In newhollandish 270hp probably means 165hp unless the pto is on, heater is on setting 3 and the prevailing wind is SSW.