Dave6170
Member
- Location
- Watten, caithness
Prototype 1 road grader out of my bargain h beams!
Hope so it can set that frame on the ground anyway. It used to be a buckrake.your linkage go that low ?
Your not that much of a hillbilly or you would of just let it run down the side of the tyre
The 3 point linkage part is only tacked on for now. I may move it up a bit if i can. I still have 2 bits of h beam like that yet if prototype 1 is no use.The only thing about linkage being so low it will be inclined to lift the grader as you pull it? May or may not be a problem but I would think the grader will work better when lift arms are pulling levelish. Be interested to see it working though
Health and what??Wondering what people though of this bit of hay work being done. Starts at 31 minutes. Thought it might belong here.
http://www.bbc.co.uk/iplayer/episode/b07zvr81/wild-west-americas-great-frontier-2-the-high-country
Wondering what people though of this bit of hay work being done. Starts at 31 minutes. Thought it might belong here.
http://www.bbc.co.uk/iplayer/episode/b07zvr81/wild-west-americas-great-frontier-2-the-high-country
Proper rednecks.Health and what??
Need a few runs then, but it does look a hard surface thoughIt kinda works!View attachment 415270View attachment 415272
Yeah, really all the potholed bits need dug up and graded properly then my bodged grader could be used to maintain itNeed a few runs then, but it does look a hard surface though
Leyland 384 lift off cab?
That has got @Thick Farmer written all over it, must be his January sale