Really strong gate hinges

[bobk]

Got a 20 foot gate to hang in the shed for a moveable partition for storing grain temporarily .
It's a big bugger , weighs 250 kg , so need some hinges that will hold it , needs to be 20mm pins , any suppliers ? tia

 

[GrantMo]

I’ve been using these for heavy 14 foot bull pen gates for a few years now, no breakages yet... you could easy put a triangle gusset underneath to give even more strength

Gate Pin To Weld 20mm

20mm gate pin to weld. To suit 20mm Weld On Gate Eye and 20mm Adjustable Gate Eyes

www.dciron.co.uk

 

[bobk]

I’ve been using these for heavy 14 foot bull pen gates for a few years now, no breakages yet... you could easy put a triangle gusset underneath to give even more strength

Gate Pin To Weld 20mm

20mm gate pin to weld. To suit 20mm Weld On Gate Eye and 20mm Adjustable Gate Eyes

www.dciron.co.uk

Can you get them with bolt on plates ? there's no adjustment on the gate as the eyes are welded on , I can shim the bracket if necessary to get it level

 

[Andrew]

Anything up to 30mm pin here

Gate

All the accessories from eyes and hooks to fittings that you will need to assemble a swing gate, available from stock. Buy online or call to order today.

www.fhbrundle.co.uk

 

[GrantMo]

Looks like they have bolt on options too, best way I’ve found is to have the adjustable eyes on the gates then you can always get them bang on, even after they’ve had an ‘adjustment’ with the telehandler!

 

[cb387]

You can get hinges with bearings inside. Not sure how much weight they can take but we have some on a big gate and they are very good. Called Superhinge IIRC

 

[Hilly]

I use three on 6meter sheeted doors .

 

[the-mad-welder]

Gate

Gatemaster super hinges suitable for gates up to 200kg, the most durable gate hinges in our range. Buy online or call to order. FREE UK mainland available.

www.fhbrundle.co.uk

I've got on well with these, 30mm pin ones are good for 400kg.

 

[Skintagain]

Gate

Gatemaster super hinges suitable for gates up to 200kg, the most durable gate hinges in our range. Buy online or call to order. FREE UK mainland available.

www.fhbrundle.co.uk

I've got on well with these, 30mm pin ones are good for 400kg.

I was just going to say drill another plate and slide it over the top of the hinge so it’s suported on the top of the hinge peg.

 

[ED.D]

This any good?

Door Hinge Assembley

Door Hinge Assembley

www.fairportcontainers.co.uk

 

[AJR75]

Sole issue I've found with alot of these hinges is they fail where the pin is welded into the body. Perhaps belt and braces but a clevis type arrangement with say an M20 bolt through to secure would be very robust.

 

[bobk]

I use three on 6meter sheeted doors .

Yes thinking this is the way to go , lot of strain on the top hinge

 

[Hilly]

Yes thinking this is the way to go , lot of strain on the top hinge

I had a bottom one break due to Muck pressure , didn’t matter as still two holding , if had only been two would have been carnage .