Hi Guys,
The brakes on the Renault have gone soft and only just stop the old bus. I tried to bleed them thinking there was air in the brake fluid, but can only get a small amount of fluid out of each nipple before it stops, even though following the correct tighten/loosen procedure of the nipple while brake pedal is pumped. There is plenty of fluid in the reservoir...the plastic casing looks old with a slight crack which i have taped over, but there are no leaks.
I did bleed the brakes ok about 2 years ago, and topped it up with DOT 4. The brakes have been fine until this winter when the tractor has been sat up in the barn for a few months.
Any ideas on why i can't bleed the brakes?
Cheers, Moog
The brakes on the Renault have gone soft and only just stop the old bus. I tried to bleed them thinking there was air in the brake fluid, but can only get a small amount of fluid out of each nipple before it stops, even though following the correct tighten/loosen procedure of the nipple while brake pedal is pumped. There is plenty of fluid in the reservoir...the plastic casing looks old with a slight crack which i have taped over, but there are no leaks.
I did bleed the brakes ok about 2 years ago, and topped it up with DOT 4. The brakes have been fine until this winter when the tractor has been sat up in the barn for a few months.
Any ideas on why i can't bleed the brakes?
Cheers, Moog