Sanderson fuel feed

[Flat 10]

Does anyone know if there are any gauzes in the tank on a 726 sanderson? I know its top not bottom fed and that there are 2. rest of fuel system was well mucky so needs a clean up. Looks like you need to drop the tank to have a look? @MF-ANDY ?
Thanks

 

[Flat 10]

Sorry @ACEngineering

 

[ACEngineering]

Does anyone know if there are any gauzes in the tank on a 726 sanderson? I know its top not bottom fed and that there are 2. rest of fuel system was well mucky so needs a clean up. Looks like you need to drop the tank to have a look? @MF-ANDY ?
Thanks

No filter in tank.
2 plastic elbows top of tank that often block.
Front one is suction back one is return.
Take the brace straps off from the side of tank that support wing. Wedge a block of wood under wing and tank to gain you a couple inches!
You will probably knacker the plastic elbow unscrewing it?‍ dont blow it back it'll only block again other day.

Or take the drain bung out and get a bottom tap outlet in it off a ford/MF and forget the plastic elbow.
Take filter off the tap and fit a plastic tube about 2" to 3" long it'll dot bottom of tank out before it blocks again?