set of cambridge rollers

a set of Lichfield foundry rollers in good condition.
Front roller is 10 foot and the back to rollers are 8 foot.
All rings are good
been use until this time but bought a folding set now.
Stafford

 

[bobk]

a set of Lichfield foundry rollers in good condition.
Front roller is 10 foot and the back to rollers are 8 foot.
All rings are good
been use until this time but bought a folding set now.
Stafford

How much ?

 

[barr11]

£1100 he told me via a pm.

 

[Hfd Cattle]

£1100 he told me via a pm.

But it's in the £350 and under thread !

 

[barr11]

About where I thought they belonged too tbh .

 

[Hfd Cattle]

350 would be tops I would have thought .

 

[spin cycle]

But it's in the £350 and under thread !

lots of stuff over £350 appears on it

 

[Hfd Cattle]

lots of stuff over £350 appears on it

But it might be worth the money

 

[ajcc]

£350 each roller?

 

[bobk]

£200 / ton .

 

[barr11]

He said they were worth £1100 in scrap so at £200/ton must weigh 5.5 ton, they really would be strong man rollers .

 

[Hfd Cattle]

He said they were worth £1100 in scrap so at £200/ton must weigh 5.5 ton, they really would be strong man rollers .

Then his best job is to scrap them then !
I've just bought an old MF combine with a dodgy pulley .bought it right enough that if it's no good I can drive it the 2.5 miles to the scrap yd and double my money ! Been on the same farm from new ..1976 ! Only done 30 odd acres a yr .

 

[bobk]

£1100 he told me via a pm.

I'll give him 350 , cash

 

[barr11]

I'll give him 350 , cash

Kinda what I was thinking too, but when he was at £1100 I just assumed the gap was too wide. Only really wanted the 10ft’er to tow behind the discs, most are only 8ft.

 

[bobk]

Kinda what I was thinking too, but when he was at £1100 I just assumed the gap was too wide. Only really wanted the 10ft’er to tow behind the discs, most are only 8ft.

So they don't couple together ?

 

[Hfd Cattle]

Kinda what I was thinking too, but when he was at £1100 I just assumed the gap was too wide. Only really wanted the 10ft’er to tow behind the discs, most are only 8ft.

Same here ...only want the 10' one

 

[barr11]

So they don't couple together ?

Yeah they’ll couple together, looking at the photos they’re still attached together. Would make a 26ft set I’m guessing.

 

[lamb89]

As I can see £1100 is a bit to much but id say they would be 3 ton in the scrap. We wont scrap them as they are a decent set of rollers but if we can get a decent offer above that value we will let them go now. They are a set but can fold up behind each other. 1 10 foot and 2 8 foot.