Subsoiler with packer on back

[jon9000]

As the title says. PM or e mail [email protected]
Thanks

 

[grainboy]

Have this available

 

[Chae1]

@davedb

 

[jon9000]

Have this available

Could do with more legs.... ideally 5

 

[quattro]

I’ve a 5 leg Spalding auto reset with a packer

 

[ih1455xl]

5 leg flat lift with knight press packer roller £1000 with loads of spares

 

[average farmer]

I’ve a 5 legs Simba flatliner with a DD packer if that suits?

 

[davedb]

I’ve got a 4 leg farmrite that can be made into a 5 leg got good metal on it and I do have the 5th leg but that needs new metal if any good?

 

[jon9000]

Gosh lots of options. Ideally I need five legs and three meters wide and a gap between the last leg and packer would be good

 

[Will 1594]

Do you want a 5 leg cousins ,with zone packer , also have normal and low disturbance legs ,and normal crumbler bar roller with it ,you can run it 2/3 or 5 legs ,and has space between last legs and packer if you thinking of a seeder ,
Pm your details

 

[TractorMike]

HeVa 5 leg 3M with packer, Hydraulic depth control As new done less that 100 acres from new. £6750 michael 07599552864

 

[TractorMike]

 

[jon9000]

That does look the business..... however a bit more than I was planning on spending.

I’ve a 5 legs Simba flatliner with a DD packer if that suits?

Do you have any pictures?

 

[average farmer]

N

Think we put 3 new legs on last year, the ones with out the hard facing on.
On one of the legs the 2 bits of flat on the front side of the brackets are bent but have bought some new ready to put on .
Good machine , we could do with something a bit wider .

 

[bobk]

View attachment 800774 NView attachment 800772 View attachment 800770 View attachment 800768 Think we put 3 new legs on last year, the ones with out the hard facing on.
On one of the legs the 2 bits of flat on the front side of the brackets are bent but have bought some new ready to put on .
Good machine , we could do with something a bit wider .

How much are you thinking John ?

 

[Captain Slack]

View attachment 800774 NView attachment 800772 View attachment 800770 View attachment 800768 Think we put 3 new legs on last year, the ones with out the hard facing on.
On one of the legs the 2 bits of flat on the front side of the brackets are bent but have bought some new ready to put on .
Good machine , we could do with something a bit wider .

How wide would suit.