T7245 manual mode problem

[DNMC]

Hi all
I have recently bought a 2017 t7245 and am still learning how to drive it.
When I select manual mode I can’t get the tractor to move, it will only rev the engine with both the hand throttle and foot peddle. Is there something that I am not doing correctly or would it need a software upgrade?

 

[Chae1]

Might be helpful if you said what gearbox it has.

 

[DNMC]

Sorry it’s auto command

 

[Chae1]

I have never driven ours in manual. Set it in automatic.

It's a great gearbox. Was round baling with ours yesterday.

 

[del_boy]

Hi all
I have recently bought a 2017 t7245 and am still learning how to drive it.
When I select manual mode I can’t get the tractor to move, it will only rev the engine with both the hand throttle and foot peddle. Is there something that I am not doing correctly or would it need a software upgrade?

Never drove one in manual mode can't see a use for it but I'd say you will need to put some rev on then push and hold the stick in forward position.
Use it in auto much better

 

[Drillman]

Had auto command here for almost 5 years and never used manual mode yet

 

[Michael3112]

In manual mode foot pedal amd hand throttle does revs the joystick does the movement theres not really any use for it, run it in auto its a pointless feature in the first place

 

[DNMC]

Ok thanks for your replies. I thought it should be the same as when in pto mode only with no pto, with the foot operating the ground speed and hand throttle changing the engine speed.

 

[Michael3112]

Ok thanks for your replies. I thought it should be the same as when in pto mode only with no pto, with the foot operating the ground speed and hand throttle changing the engine speed.

Use the rev memory buttons if you want constant revs or put the hamd thottle to the minimum amount of revs you want an the tractor will use more if it wishes