Teagle tomahawk 8100

[Beefy23]

i have a problem with my teagle it won't connect itself to the control box, I've reset it checked all the cables and still nothing . I phoned teagle and the said to check the control box on the machine its self and there is ment to be a light flashing in the circuit board but mine isn't .Has anyone else had this problem the machine is just a year old from new so not impressed this is happening

 

[green giant]

Are you sure one of the wires hasn't pulled out of the back of the plug??? Had this about 4 times on different machines!!! Double check, as when this happens the blue tooth won't connect.

 

[Beefy23]

Are you sure one of the wires hasn't pulled out of the back of the plug??? Had this about 4 times on different machines!!! Double check, as when this happens the blue tooth won't connect.

That was my first guess I'll have a look again in the morning I hope it's something that simple

 

[foxbox]

Our older machine has an inline fuse powering the control box in the cab. The fuse holder is a bit naff and over time has developed the habit of breaking the circuit by losing contact with the fuse. The fuse isn't blowing (a LED lights on the fuse when it's either blown or the circuit is broken) and wedging something in to the fuse holder cures the problem.

 

[Gatehouse Farm]

Are you sure one of the wires hasn't pulled out of the back of the plug??? Had this about 4 times on different machines!!! Double check, as when this happens the blue tooth won't connect.

Yep ours does that if you're not careful when disconnecting. We have also had to pair our machine and box in the cab before, can't remember what we had to do but was very simple.

 

[Beefy23]

I know I am hijacking my own thread but do any of you have any experience of using or owning a teagle muck spreader ?

 

[green giant]

Just the ones we have demo'd, they go well.

 

[Tom Teagle]

Hi Daniel,

Sorry to hear that you have a problem with this. If the green LED light inside the grey control box on the machine isn't flashing then there is no power getting to that section. These are the steps I would follow to identify what is going on:

1. Check the (7.5A) fuse and the red light on the fuse housing which, if on, indicates the fuse has gone, as foxbox above correctly states. If the fuse is not blown but the light is on then try squeezing the plastic housing with some blunt pliers, which will tighten the moulded-in spade terminal. Either way the aim is to turn off the red light!

2. If the green LED is still off, try removing the D plug from the fly lead at the back of the bluetooth controller in the tractor, and connect it direct into the tractors D plug instead of the cab control desk. If the light then starts to flash then it's the fly lead that has a problem.

If none of this works then please contact Mike Ibbotson, our service manager on 01872 562367, or feel free to give me a call.

TT - 07817 056521

 

[Beefy23]

Managed to fix it this morning the connection was loose on the lead a quick pinch with some pliers tightened up the connection so all is good for the moment