- Location
- Lancashire
Today at work
- Thread starter Penmoel
- Start date
- Location
- Near Colchester
yard is like the moon surface here, no rain so far.
nearly hay but not enough to bother with for that and it might rain.
nearly hay but not enough to bother with for that and it might rain.
- Location
- Lancashire
Rained most of the day her, put the last 78 hoggs inside last neat just incase they got the forecast right, good job i did, they did for once
- Location
- Hereford
Good very pleased .. only a basic wrapper but a big step up from the old Lawrence Edwards ! That ones off to Brightwells sale next week !!
- Location
- Exeter, Devon
Disappointed by the amount of rain we got, but at least we got our second lot of planting done.
Dman2
Member
- Location
- Durham, UK
Ist day silageing
Did some silage on Monday. Nice stuff but less than half the crop from last year. Still got lot of last years silage left over though.
Got the grass fertilised before the 6mm of rain too.
Today we went and got this home. Just over 2hr drive. Through Dundee and up the A90.
Frankzy
Member
- Location
- Jamtland, Sweden
Afraid we don't have anything to put it next to for scale but for some sense of it I was stood about a metre higher than the tractor. I guess I could park the car in front of it...
- Location
- East Sussex
All looking a bit machinery and planty on here lately...... I present you with a cow......
I think she needs a bit of hp sauce on that!All looking a bit machinery and planty on here lately...... I present you with a cow......
- Location
- NSW, Newstralya
Went to pick up some wheat seed from a mate near Tambar Springs ( about 60 km SW ) this morning. He was able to get some late sunflowers planted. ( very few dry land crops of anything were planted this summer )
Being along Coxs Creek & trees, the galahs & cockatoos have been hammering them since they came out in head. They have 7 scare guns set up & he & his 2 sons have been spending up to 6 hours a day on the 12 gauges for the last 2 months.
But, they are worth $1100 - $1500 / tonne
Being along Coxs Creek & trees, the galahs & cockatoos have been hammering them since they came out in head. They have 7 scare guns set up & he & his 2 sons have been spending up to 6 hours a day on the 12 gauges for the last 2 months.
But, they are worth $1100 - $1500 / tonne
Dave6170
Member
- Location
- Watten, caithness
There still a few of you guys around there still do your own silage? Bet it was interesting driving that home? Looks like a monster!
Gerbert
Member
- Location
- Dutch biblebelt
Sold some sand to the contractor.
- Location
- Near Colchester
shocked that you didn't get a milwaukee.
Nowt as exciting as some of you , but maybe better in classic earning keep or scrap heap challenge ,
Put 3600 kg through old waggler yesterday afternoon on wild bird strips all 26 of them , drilled another 7 acre of maize next door , and rolled it
Good job it’s all by hour
Oh and @bumkin wall nearly done might get some of top finished at weekend , hope not better if it rains
Put 3600 kg through old waggler yesterday afternoon on wild bird strips all 26 of them , drilled another 7 acre of maize next door , and rolled it
Good job it’s all by hour
Oh and @bumkin wall nearly done might get some of top finished at weekend , hope not better if it rains
Last edited by a moderator:
Maybe one day ?
A few of us still have choppers but getting fewer I guess. That one came from @capfits and was replaced by a lely storm. My mate has a lely too.
Combine wasn't too bad. It is narrower than the old TX66. Some good bits of road have a meter wide drain at the edge that you can run on. Not so good bits are kerbed right at edge of carriageway and you are then forced to run over the white line.?
Larel
Member
The grab is really good, so much easier than a bale spike. I lift 2 with it no bother, it has 4 short teeth in each side, I grip the bottom bale with 3 teeth and the top bale with the 4th tooth. I also have a double height grab of the same design that I made at the same time. The one I have on that tractor was originally made for my MF550, and the bigger one I had on a 3CX. I'll try and send you a link to the pictures.
- Location
- pembrokeshire