Today at work

[Robert K]

Do you get the seed to spread full width?

Are you looking for a seeder box

 

[bigg6480]

View attachment 899945Today’s little purchase brought home , needs a little tlc and then good to get on with my other purchase from @Great In Grass

good drills just keep a eye on the top link tube they can crack and then the drill try’s to get in the cab with you.

 

[Robert K]

Mole ploughing with the 240

Plenty of ballast 1400kg on the front and 1250kg on the rear

First load tipped off

Always plenty of itchy dust on this job

 

[Warp Land Farmer]

Are you looking for a seeder box

Possibly, I have a single Stocks micrometer which is ok for wider bands but possibly not full width seeding. Do you know of something?

 

[Bobthebuilder]

Nearly got a puncture in my left foot after nearly standing on these 2 when locking up tonight

 

[Robert K]

Possibly, I have a single Stocks micrometer which is ok for wider bands but possibly not full width seeding. Do you know of something?

I have sent you a pm

 

[Fendt65]

"watching" the BBQ while Mrs teslacoils goes to buy me a beer. Tea, then back to cultivate the headlands.

I tried cultivating my wife’s headland just taking some anadin

 

[Adeptandy]

Back together and back at it this afternoon

 

[Gator]

Was gonna shake it out again but going off there track record tbe last few weeks desided to row it all and bail it

85 altogether

All home, tea time then wrap

11pm, last one for toneet

 

[Jon 3085]

Finished straw carting,last year had 1151 bales,this year had 652 bales off the same acreage.

 

[solo]

View attachment 899996Finished straw carting,last year had 1151 bales,this year had 652 bales off the same acreage.

Lucky you didn’t make the bales an inch or two bigger for the new trailer My B&B cattle man now has two trailers like yours from DS I presume. This years rounds didn’t quite match the length so the thripple had to be leant out.

 

[Jon 3085]

Lucky you didn’t make the bales an inch or two bigger for the new trailer My B&B cattle man now has two trailers like yours from DS I presume. This years rounds didn’t quite match the length so the thripple had to be leant out.

Yes we are pleased with the trailer,very well Made and value for money,it’s 28’ so the bales fit just right.

 

[Hilly]

https://www.facebook.com/100003720377167/posts/2117718891695436

 

[Bobthebuilder]

Afternoon on demo thunderbird 1 can’t quite get what all the hype is about

 

[Fendt516profi]

Takes a few days to get used to it

 

[Pan mixer]

Mate brought a load of straw round as I was a bit short, grab envy now.

went to borrow a cultivator from another mate, he hadn't used it for a while.

 

[Hfd Cattle]

tedded out some second cut

 

[le bon paysan]

I've got a dp7 and it's a pain to get right, I went to the trouble of increasing wheel track width by 2 inches and it now ploughs worse than it did before.
It seemed to like the fact front track was slightly wider than rear .
Now they are the same ploughing is worse. Front furrow measurement is correct but front furrow takes too much .

Used to have a dp 7 d2 and it was adog to set up. Sonny Smith came to the farm for a plough set up day for the training group. My plough always took to muck ground with the front furrow, Sonny said that the frogs were bolted on and I should unbolt them, hold in place with self locking grips and weld them on. Worked a treat after .

 

[matthewizod]

Thank you stone traps

Friend stopped by to take some photos last night

 

[Lincs Lass]

View attachment 900286View attachment 900285
Thank you stone traps

Friend stopped by to take some photos last night View attachment 900287

Looks more like you needed a sledge hammer ,not a stone trap ,surely that rock didnt go over the bed