- Location
- Near Colchester
Got these in today.
and then rolled them in.
and then rolled them in.
Why are you using alternate high tensile barb with mild steel?
Just for the simple reason that ran out of ht. And thats all he had.Why are you using alternate high tensile barb with mild steel?
Won't that water tank leak with a four inch post driven through it!?.
on wills barb wire fence half the wires are mild steel barbed wire and the others are high tensile barb wire. If you look closer you can see the high tensile is thinner wire.Please can you explain what you’re asking?
on wills barb wire fence half the wires are mild steel barbed wire and the others are high tensile barb wire. If you look closer you can see the high tensile is thinner wire.
View attachment 662280 Phone call today from a neighbour who said he’d got his tractor stuck. Went down to pull him out and found he actually had got his gator stuck so tried to pull it out with his one tractor which in turn got stuck and then he went with his second tractor and got that stuck. I had one go at pulling him out and got stuck but skidded my way out. Said I’d go back tomorrow with a digger to try and pull him out. Just had a phone call to say there are now two 180hp tractors stuck as well.
The poor thing, going from such a nice area to a bleak place like that!This lad rolled in this morning, had to meet him in the car park off the main road. Too tight about the farm for machines that size. He was away to Stornaway next.View attachment 663040 got a self drive hire of the merlo to unload the metal worker ...View attachment 663042 at 2.5 ton I thought it'd push the Nash 474 to its limits... View attachment 663078Then it was into the old dump trailer for the last few miles.. Bit rough the track.. So threw a couple straps round itView attachment 663094 the punch/shear was in the wrong place,View attachment 663098 so moved it round to the other side of the shed... Slowly..View attachment 663100 Just got it in without needing to take bits offView attachment 663102a wee nudge and it rolled in.View attachment 663104off it came..View attachment 663106and in it went
The poor thing, going from such a nice area to a bleak place like that!
Busy pumping, it’s been a bit of a learning curve with the washing machine working overtime but I’m gettog there now
Made a trailer to move it all on aswell
View attachment 663130
View attachment 663132 View attachment 663134 View attachment 663136
Very good. Keep that back window shut though, you're making me nervous
Back before anyone was smart enough to blow pipes out with a compressor the worst bit was finding you had to undo a coupling with pressure on at the bottom of a dip and you'd left your hi tech bit of rope at the yard
I wonder how many coupling where ran over/crushed driving down the pipe to push out the sh!t in the dark or just a sleep lol
If you just caught the tail you wouldnt know untill pumping again and it would block up ralmfao
These lads know have it easy back in the mid 90's we where running blind
I tryd to finish near a stream to pump water throo back to pit or get a tanker of water in yard to flush pipes out with water so not to get covered in sh!t
We pumped a lot of up and down hills so it always had parts still full and when double pumping we took water to middle pump and pumped half back to pit and half to spreader
Those we the days pumping 16-18hrs a day or not stoping if it waz freezing glad i sold up when systems came cheap and every body got em and started a price war same old story
What are they dressed beans?