Jimbo
Member
- Location
- The kingdom
looking for a good 3/4 torque wrench for tightening up my tractor wheels ! Just wondered what others are using and best place to buy online ?
3/4 socket , bar and scaffold pole , buzz em of with the impact wrench
As above, if it still doesn't shift, get your mate to tap directly over the socket with the sledge as you pull.
Been there done that got the t shirt ! Nearly lost a floatation wheel sowing wheat on a steep field ! Only two wheel nuts left holding wheel on rest gone3/4 socket , bar and scaffold pole , buzz em of with the impact wrench
Same as oursI have one of these - can't fault it:
https://www.toolstop.co.uk/norbar-1...-adjustable-300-1000-n.m-200-750-lbf.ft-p1660
Would this one be in a good range for normal farm use ? Tractor , trailer ,combine ect !I have one of these - can't fault it:
https://www.toolstop.co.uk/norbar-1...-adjustable-300-1000-n.m-200-750-lbf.ft-p1660
We use this one on tractors, trailers self propelled sprayerWould this one be in a good range for normal farm use ? Tractor , trailer ,combine ect !
FT torqueAnyone know what wheel nut torque setting are on a t7 newholland ?
Been there done that got the t shirt ! Nearly lost a floatation wheel sowing wheat on a steep field ! Only two wheel nuts left holding wheel on rest gone
Funny this thread should appear. I've just realised I have a need for a torque wrench capable of 350nm and taking a 36mm socket. I only need it for once a year.
FT torque